(5/24)
LED
(Blinking in
orange)
Error
Error
code
Solution Remarks
16 times No ink (no raw ink). [1688] Replace the empty ink tank(s),
and close the scanning unit
(cover).
Printing with an empty ink tank
can damage the printer.
To continue printing without
replacing the ink tank(s), press
the Resume/Cancel button for 5
sec. or longer to disable the
function to detect the remaining
ink amount. After the operation, it
is recorded in the printer that the
function to detect the remaining
ink amount was disabled.
19 times Non-supported hub [2002] Remove the applicable USB hub
from the PictBridge (USB)
connector.
*1: Only for models supporting CD / DVD printing
*2: Only for models not supporting CD / DVD printing
To Next Page
Loading...
