Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4
Press ▲ or ▼ to select Repl. S. Cleaner, and then press the OK button.
The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen.
5
Open the Top Cover.
Note
• If you do not respond within two minutes, shaft cleaner replacement is canceled. In this case, repeat the proce-
dure.
6
Hold the Shaft Cleaner on the right side of the Car-
riage by the grips (a) and pull it to the right to re-
move it.
iPF8400
Replacing the Maintenance Cartridge
Basic Guide
Consumables and Maintenance Maintenance Cartridge
51
To Next Page
Loading...
