3
Using a TCP/IP Network
3-98 Windows 2000/XP/Server 2003/Vista
Windows 2000/XP/Server 2003/Vista
This section describes the procedures for using the default home directory under [Default FTP Site].
To use other settings, enter the FTP site and home directory by referring to the IIS documentation.
It is recommended that the FTP server be configured by the network administrator.
In the following procedures, items displayed on the screens for Windows 2000 are used. The items
displayed may differ according to your operating system.
Remark
The use of Windows 2000 Server/XP Professional/
Server 2003/Vista as an FTP server requires the
installation of IIS. If IIS is not installed in the computer
you are using, you will need to install the version of IIS
for the operating system you are using before entering
these settings. (See "System Requirements(p.1-14).")
For installation procedures, see the manuals provided
with your operating system.
User authentication for access to FTP servers is
performed using the local account database of
Windows 2000 Server/XP Professional/Server 2003/
Vista used as the FTP server. Therefore, it is
notpossible to use the account of a domain user
registered in Windows 2000 Server/XP Professional/
Server 2003/Vista to send data directly from the
machine to FTP servers in other domains.
If you are using Windows Vista, a dialog box may be
displayed while you are performing the procedure. In
this case, enter a user name and password. For more
information, see the manuals provided with the
operating system.
1. Log on to Windows as a member of the group with access rights to the
directory to be designated as the FTP site directory → start IIS.
Depending on your environment, the access rights settings for a drive or directory may differ.
For details, see the Windows manual.
2. In the [Default FTP Site Properties] dialog box , on the [Security Accounts]
sheet, deselect the option which allows only anonymous connection.
Acesst 1.0 6251194
To Next Page
Loading...
Need help?
General
