62
Once you compose the shot, such as for a group photo, and press the
shutter button, the camera will take three shots in a row two seconds after it
detects your face (p. 78) when you enter the scene.
Select ".
● Follow Step 2 on p. 61 and select ".
Compose the scene and press the
shutter button halfway.
● Make sure a green frame appears on the
face of the main subject, and white frames
appear on other faces.
Press the shutter button fully.
X The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
X The lamp blinks and the self-timer sound
plays.
Join the subjects and look at the camera.
X When the camera detects a new face, the
lamp and sound speed up (the lamp
remains lit when the flash will fire), and
two seconds later the shutter releases.
X The second and third shots will continue
to be taken.
● To return to the original setting, select
in Step 2 on p. 61.
Even if your face is not detected after joining the subjects, the shutter will release
approximately 30 seconds later.
For the screen in Step 1, press the
n
button and select [FaceSelf-Timer] in the
[Drive Settings] screen, then press the
qr
button to change the number of shots.
" Using the Face Self-Timer
What if a face is not detected?
Changing the number of shots
To Next Page
Loading...
Need help?
General
