Canon Legria HFG30 User Manual

Onscreen Displays and Data Code
89
Onscreen Displays and Data Code
You can turn most onscreen displays on or off.
Repeatedly press D to turn the onscreen displays on/off in the following sequence:
mode:
• All displays on
• Onscreen markers
1
• Displays off
mode
2
:
• Only data code on
• All displays on
1
The onscreen markers will be displayed only when p >
[Onscreen Markers] is set to an option other than [j Off].
2
Pressing D has the same effect as touching the screen. During single photo view and while playing
back a scene, the playback controls are displayed only momentarily.
Operating modes:
About the Data Code
With every scene or photo recorded, the camcorder keeps a data code (date/time of recording,
information about the camera setup, etc.).
You can select the information to be displayed with the s / > [Data Code] setting.
COPY

Canon Legria HFG30 Specifications

General

Sensor Type	CMOS
Image Processor	DIGIC DV 4
Effective Pixels	2.91 MP
Lens	Canon HD Video Lens
Optical Zoom	20x
Maximum Aperture	f/1.8 - f/2.8
Video Resolution	1920 x 1080
Viewfinder	Color EVF
Recording Format	AVCHD, MP4
USB Interface	USB 2.0
Focal Length	26.8 - 576 mm (35mm equivalent)
Image Stabilization	Optical
Frame Rate	25p
LCD Screen	LCD
Storage Media	SD/SDHC/SDXC Memory Card
Microphone	Stereo
HDMI Output	Yes
Sensor Size	1/3 inch
Speaker	Built-in speaker