Need help?Do you have a question about the Canon LV-S2E/D78-5363 and is the answer not in the manual?
Covers development objectives, overview, and major features of the projector.
Details technical specifications like LCD panel, optical box, mechanism, and video/audio capabilities.
Describes the parts and controls of the projector, referring to attached sheets.
Provides in-depth explanation of optical system, functions, design, and remote control.
Illustrates how to connect the projector to various devices, referring to attached sheets.
Guides on projector positioning and installation precautions, referring to attached sheets.
Lists compatible computer system modes, referring to an attached sheet.
Crucial safety precautions and procedures for servicing and inspection.
Instructions for replacing the projector lamp and resetting the monitor timer.
Explains fuses and temperature protection mechanisms like thermal sensors.
Step-by-step guide for disassembling mechanical parts of the projector.
Procedures for cleaning the projector's optical and internal components.
Guidelines and service mode entry procedures for performing adjustments.
Details on adjusting various electrical parameters like fan voltage and signal levels.
Identifies specific test points on the PCB for measurement during adjustments.
Lists option resistors and their values for setting projector configurations.
Visual representation of the projector's internal circuitry and signal flow.
Diagram showing the power distribution and voltage lines within the projector.
Lists integrated circuits and their corresponding power sources.
Provides a flowchart for diagnosing and resolving common projector issues.
Exploded view illustrating the arrangement of mechanical components.
Detailed list of mechanical parts with part numbers and descriptions.
Diagrams showing the layout of optical and electrical assemblies.
Detailed list of optical and electrical parts with part numbers.
Diagrams illustrating electrical components and their connections.
Detailed list of electrical parts with part numbers and descriptions.
Diagrams showing the placement and routing of cables and labels.
Detailed list of cables and labels with part numbers.
Diagram illustrating the included accessories.
Detailed list of included accessories with part numbers.
Explains how to interpret schematic symbols, part codes, and readings.
Diagrams showing pin configurations for diodes, transistors, and integrated circuits.
Detailed schematics for the 0.7 XGA models.
Layouts of printed circuit boards for XGA and SVGA models.
Detailed schematics for the 0.7 SVGA models.
General| Contrast Ratio | 400:1 |
|---|---|
| Lamp Life | 2000 hours (Normal mode), 3000 hours (Eco mode) |
| Projection System | LCD |
| Screen Size | 30" - 300" |
| Input Ports | VGA, S-Video, Composite Video |
| Output Ports | VGA |
| Operating Temperature | 5°C - 35°C |
| Operating Humidity | 20% - 80% (non-condensing) |
To Next Page
