Canon MX920 series - Cannot Print to End of Job

Cannot Print to End of Job
• Check 1: Select the setting not to compress the printing data.
If you select the setting not to compress the printing data with an application software you are using,
the printing result may be improved.
Click Print Options on the Page Setup sheet on the printer driver. Select the Do not allow
application software to compress print data check box, then click OK.
* Deselect the check box after printing is complete.
•
Check 2: Is the size of the print data extremely large?
Click Print Options on the Page Setup sheet on the printer driver. Then, set Prevention of Print
Data Loss in the displayed dialog to On.
* When On is selected for Prevention of Print Data Loss, print quality may be reduced.
• Check 3: Is the space of your computer's hard disk sufficient?
Delete unnecessary files to free disk space.