Passwords policy and behaviour in the Océ PlotWave 500 and PlotWave
340/360 systems
Introduction
There are 2 groups of passwords:
• The passwords used in Océ Express WebTools
• The passwords used on the printer user panel
Passwords used in Océ Express WebTools
In Océ Express WebTools the passwords protect:
• The roles
• Name of the user of an external location
• The Proxy authentication passwords
• The security settings (preshared key for IPsec)
Password policy
• 256 characters maximum
• all MS Windows characters are allowed
Passwords used on the user panel
On Océ PlotWave 500
The following settings are protected by the System administrator or Power user password on the
user panel:
• The network settings
• The security settings
• The system update
The following settings and functions are protected by the Key operator or Power user password
on the user panel:
• The print density
• The 'Clear system' function
• The 'Install additional hardware' function
• The scanner calibration
On Océ PlotWave 340/360 up to R1.1
In Océ Express Webtools, he System administrator or the Power user can configure the
'Password to change network settings'.
This password is used on the printer user panel to protect:
• the network settings
• the security settings
NOTE
Keep this password. The reset of this password may require the intervention of a Service
technician.
Passwords modification
Password modification table for Océ PlotWave 500 and PlotWave 340/360
Password for/to
Can be changed by
Key operator Key operator or Power user
4
Passwords policy and behaviour in the Océ PlotWave 500 and PlotWave 340/360 systems
110
Chapter 3 - Security on Océ PlotWave 500 and PlotWave 340/360
To Next Page
Loading...
