Canon Oce PlotWave 300 - Page 228

Example (fake request):
-----BEGIN NEW CERTIFICATE REQUEST-----
MIIBvDCCASQAwfDELMAkGA1UEBMCRlIxDDAKBgNVBAgTA0lERjEQMA4GA1UEBxMHQ1JFVEV
J
TDEBEGA1UEChMKT2NlIFBMVCBTQTEMMAoGA1UECxMDU05TMSowKAYDVQQDEyF0ZHM3M
DAtNzQw
LnNucy5vY2VjcmV0WlsLm9jZS5uZwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAJ2NKQM
d
HjiDZ1khzTJTORxHqjKl3AtE3PXqRsiHouTH5JTceYtaBjCnxCJ4pGKY5iKN8KJiJuZG8PHxY7o
W/+zpvxN2VtX7TcyTAvyCThUwL+cqo75tvODo5HMCUa2sLdl8GO9WMLpgZkxH5KzIiO+LcI4
yQbqhENynywS0C2ObXCq3yksF74+XIO0swhoA2yfDp4T+LuF3wxys8lUH3ZhhkOYg=-
-----END NEW CERTIFICATE REQUEST-----
Save and send the request
When to do
NOTE
Step A3 of the HTTPS Description of the overall procedure on page 225.
Procedure
1.
Copy and paste the content of the request in a .csr file (named 'certificate_request.csr' by default)
2.
Send the content of this request to the Certification Authority.
Import a CA-signed certificate (into the controller and workstations)
Introduction: overall procedure
1. Import the CA-signed certificate into the controller:
• Import the 'Root certificate'
• Import the 'Intermediate certificate'
• Import the CA-certificate
2. Import the Root certificate into the workstations web browser.
Import the [Root certificate] into the controller
NOTE
Step B2 of the
Description of the overall procedure to request and import a CA-signed certificate
on page 92
Save locally or on the network all the CA-signed certificate files the Certification Authority sent
you.
Procedure
1.
In a web browser, open Océ Express WebTools (https:\\[IP address or hostname]).
2.
On the 'Security' - 'HTTPS' page, select 'Import CA-signed certificate'.
3.
Select [Root certificate].
Save and send the request
228
Chapter 4 - Security on Océ PlotWave 345/365 and Océ PlotWave 450/550