Canon Oce PlotWave 300 - Page 35

For Océ PlotWave 300 v1.2.1 and higher, Océ PlotWave 350 and Océ ColorWave 300 1.2.1 and
higher, all MS Windows characters are allowed in a password.
For previous versions of Océ PlotWave 300 and Océ ColorWave 300 the passwords can be made
of:
• Any number [0-9]
• Any letter lowercase/uppercase [a-z][A-Z]
• the following special characters:
_ - ~ ! @ # $ % ^ * ? { }
( ) = + , . ; : [ ] / | \
Passwords used on the Océ printer user panel (Océ Plotwave 300/350 and Océ ColorWave 300)
Important: These passwords can only be made of numbers.
NOTE
Keep these passwords. The loss of these passwords may require the intervention of Canon
Service.
Printer panel passwords modification table for Océ PlotWave 300/350 and Océ ColorWave 300
Printer user panel password for Can be changed by
Change of the Network Settings
System administrator or Power user
Change of the security level
Clear of the system
Print of demo and test prints
Change of the hardware/software configuration
Start of the scanner calibration
Password backup/restore policy with the 'Save Set'/'Open Set' features
Some passwords are stored into the backup set made with the 'Save Set' feature of Océ Express
WebTools (the passwords for the printer panel)
Password backup table for Océ PlotWave 300/350 and Océ ColorWave 300
Password / pincode for Backup with 'Save set'? Restore with 'Open set'?
Change of the Network Settings
Yes, encrypted
(1)
Yes
(2)
Change of the security level
Yes, encrypted
(1)
Yes
(2)
Clear of the system
Yes, encrypted
(1)
Yes
(2)
Print of demo and test prints
Yes, encrypted
(1)
Yes
(2)
Change of the hardware/software configu-
ration
Yes, encrypted
(1)
Yes
(2)
Start of the scanner calibration
Yes, encrypted
(1)
Yes
(2)
Any preshared key for IPsec No -
Mobile printing with Océ Mobile WebTools No -
Any ScanToFile remote user name No -
4
Passwords policy and behaviour in the Océ PlotWave 300/350 and Océ ColorWave 300
Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
35