S
Shannon MartinezSep 5, 2025
What to do if the Canon Printer card is currently write-enabled?
- LlawsonzacharySep 6, 2025
You cannot print in this mode. After writing on the memory card, set to Read-only mode again.
To Next PageTo Next PageWhat to do if the Canon Printer card is currently write-enabled?
You cannot print in this mode. After writing on the memory card, set to Read-only mode again.
What to do if an unsupported USB hub is connected to a Canon Printer?
If a PictBridge compliant device is connected via a USB hub, remove the hub and connect it directly to the Canon printer.
How to install the print head on a Canon Printer?
Follow the directions given in your setup sheet to install the Print Head. If the Print Head is already installed, remove it and then reinstall it. If the error is not resolved, the Print Head may be damaged. Contact your Canon service representative.
Why is my Canon Printer not ready?
Check if the Power lamp is lit green. If the Power lamp is off, turn the Canon printer on. While the Power lamp is flashing green, the machine is initializing.
What to do if the Canon Printer ink tank cannot be recognized?
Install the ink tank. The ink tank may not be compatible with this machine; install an appropriate ink tank. An ink tank error may have occurred, so replace the ink tank.
What to do if the Canon Printer scanner is not operating correctly?
Turn off the Canon printer, and unplug the power cord from the power supply. After a while, plug the power cord back in, and then turn on the machine. If the same error occurs, contact a Canon service representative.
What to do if the Canon Printer says the remaining ink level cannot be correctly detected?
Replace the ink tank and close the Scanning Unit (Printer Cover) because the remaining ink level cannot be correctly detected. Printing with an ink tank that was once empty may damage the machine. If you want to continue printing, release the function for detecting the remaining ink level by pressing and holding the Stop/Reset button for at least 5 seconds, and then release it. Please be advised that Canon shall not be liable for any machine malfunction or damage caused by refilled ink tanks.
Why is my Canon Printer machine not connected properly?
Make sure that the USB cable is plugged in securely to the Canon printer and the computer.
Why is my Canon Printer printing blurred or with wrong colors?
Printing may be unclear or of reduced quality if the media is loaded with the wrong side facing upwards. Also, ensure that all of the protective film is peeled off and the air hole is exposed. Make sure to align the Print Head after you install it.
Why is my Canon Printer not connected properly?
Make sure that the USB cable is securely plugged in to the Canon printer and the computer.
General| Print Technology | Inkjet |
|---|---|
| Functions | Print, Copy, Scan |
| Print Resolution | 4800 x 1200 dpi |
| Scanner Type | Flatbed |
| Paper Capacity | 150 sheets |
| Connectivity | USB 2.0 |
| Print Speed (Black) | 30 ppm |
| Print Speed (Color) | 20 ppm |
| Scan Resolution | 2400 x 4800 dpi |
| Copy Speed (Black) | 30 cpm |
| Copy Speed (Color) | 20 cpm |
| Paper Sizes | A4, Letter, Legal, A5, B5, Envelopes |
| Ink Cartridges | Black, Cyan, Magenta, Yellow |
