To Next PageTo Next PageWhy is my Canon Printer not powered on?
Make sure that the power cord is securely plugged into the Power Cord Connector of the Canon printer. Plug the power cord all the way in, since it may be difficult to plug.
What to do if the Canon Printer ink absorber is almost full?
Press the OK button to cancel the error so you can continue printing. However, because printing is disabled once the ink absorber becomes completely full and until it is replaced, you are recommended to contact a Canon service representative as early as possible.
What to do if a Canon Printer error has occurred?
Turn off the Canon printer, and unplug the power cord from the power supply. After a while, plug the power cord back in, and then turn on the printer. If the same error occurs, contact a Canon service representative.
What to do if the Canon Printer indicates that the ink may have run out?
If the lamp on the ink tank is flashing, replacing the ink tank is recommended. If printing is in progress and you want to continue, press the OK button with the ink tank installed. Then printing can continue, and replacing the ink tank is recommended after printing. Be aware that the machine may be damaged if printing continues when the ink is out.
What to do if envelopes are not prepared or loaded properly in my Canon Printer?
General| Print Technology | Inkjet |
|---|---|
| Functions | Print, Copy, Scan |
| Print Resolution | 4800 x 1200 dpi |
| Scanner Type | Flatbed |
| Paper Capacity | 150 sheets |
| Connectivity | USB 2.0 |
| Print Speed (Black) | 30 ppm |
| Print Speed (Color) | 20 ppm |
| Scan Resolution | 2400 x 4800 dpi |
| Copy Speed (Black) | 30 cpm |
| Copy Speed (Color) | 20 cpm |
| Paper Sizes | A4, Letter, Legal, A5, B5, Envelopes |
| Ink Cartridges | Black, Cyan, Magenta, Yellow |
