the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
##769 TX After transmitting PPS-EOP in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed.
##770 TX After transmitting EOR-NULL in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
##772 TX After transmitting EOR-NULL in ECM transmission, DCN has been
received.
##773 TX After transmitting EOR-NULL in ECM transmission, re-transmission
of the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
##774 TX After transmitting EOR-NULL in ECM transmission, ERR has been
received.
##775 TX After transmitting EOR-MPS in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
##777 TX After transmitting EOR-MPS in ECM transmission, DCN has been
received.
##778 TX After transmitting EOR-MPS in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
##779 TX After transmitting EOR-MPS in ECM transmission, ERR has been
received.
##780 TX After transmitting EOR-EOM in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
##782 TX After transmitting EOR-EOM in ECM transmission, DCN has been
received.
##783 TX After transmitting EOR-EOM in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
##784 TX After transmitting EOR-EOM in ECM transmission, ERR has been
received.
##785 TX After transmitting EOR-EOP in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
##787 TX After transmitting EOR-EOP in ECM transmission, DCN has been
received.
(9/32)
To Next Page
Loading...
