Canon PowerShot A510 User Manual

48
Shooting – The Basics
Continuous Shooting
Use this mode to shoot successive shots
while the shutter button is pressed.
z Continuous shooting speed is as follows*.
* Large/Fine mode with LCD monitor off (These figures
reflect Canon’s testing standard. The figures will vary
depending on the subject and shooting conditions.)
1 Press the FUNC. button.
2 Select *(Drive
Mode) using the
or button.
* The current setting is
displayed.
3 Select using the or button
and press the FUNC. button.
4 Press the shutter button halfway to
lock the focus.
Mode Dial
PowerShot A520: Approx. 1.9 shots per second
PowerShot A510: Approx. 2.3 shots per second
5 Press the shutter button all the
way to shoot.
z Shooting will stop when the shutter button is
released.
z The interval between shots may lengthen
somewhat when the internal memory
becomes full.
z The flash can be used, but the interval
between shots will lengthen to
accommodate the flash recharge time.

Canon PowerShot A510 Specifications

General

Megapixel	3.2 MP
Sensor type	CCD
Image sensor size	1/2.5 \
Digital zoom	3.2 x
Optical zoom	4 x
Display diagonal	1.8 \
Digital SLR	No
Dimensions (WxDxH)	90.7 x 64 x 38.4 mm
Battery technology	Nickel-Metal Hydride (NiMH)
ISO sensitivity	50, 100, 200, 400, AUTO
Shooting modes	Auto, Manual, Movie
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Flash modes	Red-eye reduction

Weight and Dimensions

Weight	180 g