Canon PowerShot A510 User Manual

81
Shooting – Advanced Functions
Advanced Functions
Switching between Focusing
Modes
You can change the autofocus frame (AF
frame) selection method. The AF frame will
appear when the LCD monitor is turned on
(p. 24).
indicates the AF frame which appears on the LCD
monitor
1 In the [ (Rec.)] menu, select
(AiAF).
z See Selecting Menus and Settings (p. 66).
Mode Dial
On
(Auto
Selection)
The camera automatically
selects between 9 AF
frames to focus on
according to the shooting
conditions.
Off
(Center-
point)
Of 9 AF frames, the center
one is selected to focus.
This is convenient for
making sure the focus is
exactly where you want it.
2 Select [On] or [Off]
using the or
button.
z After selecting an option,
you can immediately
shoot the image by
pressing the shutter button.
3 Press the MENU button.
z The AF frame is set to center-point when
using the digital zoom.
z When [On] is selected, pressing the shutter
button halfway will display the AF frames in
the LCD monitor.

Canon PowerShot A510 Specifications

General

Megapixel	3.2 MP
Sensor type	CCD
Image sensor size	1/2.5 \
Digital zoom	3.2 x
Optical zoom	4 x
Display diagonal	1.8 \
Digital SLR	No
Dimensions (WxDxH)	90.7 x 64 x 38.4 mm
Battery technology	Nickel-Metal Hydride (NiMH)
ISO sensitivity	50, 100, 200, 400, AUTO
Shooting modes	Auto, Manual, Movie
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Flash modes	Red-eye reduction

Weight and Dimensions

Weight	180 g