Canon PowerShot G3 User Manual

136
Connecting the Camera to a Printer
You can make clear prints swiftly and easily when you connect the camera to a
direct print function compatible printer (optional) or a direct print function
compatible Bubble Jet printer (optional). It can also be used with DPOF print
settings.
○○○○○○○○○○○○○○○○○○○○○○
• You are recommended to use the Compact Power Adapter CA-560 to power the
camera when it is connected to the printer. If you are using a battery pack, ensure
that it is fully charged.
○○○○○○○○○○○○○○○○○○○○○○
• Refer to the System Map included with this camera kit for printer information.
• Please see your printer’s user guide for instructions on loading paper and installing
ink cassettes / tanks.
Connecting to a Direct Print Function Compatible Printer
Two direct interface cables are supplied with the printer. Use the cable (DIF-100)
that has a
Symbol on the connector to connect to this camera.
1
Turn off the camera (p. 29).
2
Attach the power cable to the printer and plug the other end
into power supply, or, install the printer’s rechargeable battery.
• Depending on the type of printer you have, it may or may not use
rechargeable batteries. Refer to your printer’s user guide.
3
Open the LCD monitor.

Canon PowerShot G3 Specifications

General

Digital SLR	No
Dimensions (WxDxH)	121 x 69.9 x 73.9 mm
Digital zoom	3.6 x
Optical zoom	11 x
Focal length range	7.2 - 28.8 mm
Megapixel	4 MP
Internal memory	32 MB
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Flash modes	Auto

Weight and Dimensions

Weight	410 g