Canon PowerShot G5 User Manual

PowerShot S400 DIGITAL ELPH/DIGITAL IXUS 400
96
PowerShot S400 DIGITAL ELPH/DIGITAL
IXUS 400
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied USB cable to the computer’s USB port and the
camera’s Digital terminal as shown below.
2
Set the mode switch to the replay mode and turn the camera’s
power on. This will prepare the camera to exchange data with the
computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.2
See ArcSoft Camera Suite 1.2 CD-ROM (p. 104) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
•RAW images cannot be recorded.
•The camera's LCD monitor will not display images and the Video OUT
settings cannot be set while the Viewfinder function is on in the
Shooting-RemoteCapture window of RemoteCapture.
USB Port
USB Cable
To the Digital
Terminal
1. Slip a fingernail under the
terminal cover and lift to open.
2. Insert it all the way until it clicks.

Canon PowerShot G5 Specifications

General

Sensor Type	CCD
Aperture Range	f/2.0-f/3.0
Storage	CompactFlash (Type I or II)
Shutter Speed	15 - 1/2000 sec
Sensor Size	1/1.8 inch
Resolution	5.0 MP
Display	1.8-inch LCD
Camera Type	Compact
Image Processor	DIGIC
Lens Focal Length	7.2 - 28.8 mm
LCD Screen	1.8 inches
Storage Type	CompactFlash (Type I or II)
ISO Sensitivity	50, 100, 200, 400