EasyManua.ls Logo

Canon PowerShot SX130 IS

Canon PowerShot SX130 IS
282 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68
You can choose the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
The focusing range is approximately 5 cm – infinity (2.0 in. – infinity) at
maximum wide angle (j), and approximately 1 m – infinity (3.3 ft. – infinity)
at maximum telephoto (i).
Enter G mode.
Set the mode dial to G.
Adjust the settings according to
your purposes (pp. 68 – 77).
Shoot.
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Enter Exposure Compensation
mode.
Press the b button.
Adjust the brightness.
While watching the screen, turn the  dial
to adjust the brightness, then press the b
button.
X The exposure compensation amount will
appear on the screen.
Shooting in Program AE
What if the shutter speed and aperture value appear in orange?
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value are shown in orange. Try the
following settings to obtain the correct exposure.
Turn on the flash (p. 69)
Choose a higher ISO speed (p. 72)
Adjusting the Brightness (Exposure Compensation)

Table of Contents

Other manuals for Canon PowerShot SX130 IS

Related product manuals