93
You can automatically correct red-eye that occurs in images taken with the
flash.
Choose [Flash Settings].
● Press the n button to choose [Flash
Settings] in the 4 tab, then press the m
button.
Adjust the setting.
● Press the op buttons or turn the  dial
to choose [Red-Eye Corr.], then press the
qr buttons to choose [On].
X Once set, Πwill appear on the screen.
Red-Eye Correction
Red-eye correction may be applied to areas other than red eyes. For
example, when red make-up has been used around eyes.
• You can correct recorded images (p. 131).
• With the flash raised, if you press the r button and immediately press the
n button, the screen in Step 2 will appear.
To Next Page
Loading...
