13
Preventing Malfunctions
Avoid Strong Magnetic Fields
Never place the camera in close proximity to electric motors or
other equipment generating strong electromagnetic fields.
Exposure to strong magnetic fields may cause malfunctions or
corrupt image data.
Avoid Condensation Related Problems
Moving the equipment rapidly between hot and cold
temperatures may cause condensation (water droplets) to form
on its external and internal surfaces.
You can avoid this by placing the equipment in an airtight,
resealable plastic bag and letting it adjust to temperature
changes slowly before removing it from the bag.
If Condensation Forms Inside the Camera
Stop using the camera immediately if you detect condensation.
Continued use may damage the equipment. Remove the CF card
and batteries or power cord (if connected) from the camera and
wait until the moisture evaporates completely before resuming
use.
Extended Storage
When not using the camera for extended periods of time, remove
the batteries from the camera or battery charger and store the
equipment in a safe place. Storing the camera for extended
periods with batteries installed will run down the batteries and
may damage the camera.
However, the date, time and other camera settings may reset to
default settings if the batteries have been removed for more than
three weeks.
To Next Page
Loading...
Need help?
General
