Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print User Manual

28
• The date, time and other camera settings may reset to the
default settings if the batteries have been removed for
more than three weeks.
• Setting the date and time settings does not cause the
date/time stamp to appear on images. For printing
images with the date on them, refer to the
Direct Print
User Guide
and Software Starter Guide .
Charging the date/time battery
• The camera has a built-in rechargeable lithium battery
for saving settings such as the date and time. This
battery is recharged by the AA-size batteries while it is
in the camera. Right after purchasing the camera, leave
fully charged batteries in the camera, or plug in the AC
Adapter Kit ACK600 (sold separately), for about 4 hours
to charge the date/time battery. It will charge even when
the camera power is turned off.
• If the Date/Time menu appears when the camera power
is turned on, the date/time battery charge is low. Use the
above method to recharge it.

Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Specifications

General

Brand	Canon
Model	Printing Using a Direct Camera/Printer Connection Guide Direct Print
Category	Digital Camera
Language	English