Canon QL FT - Page 26

5 Bring down the QL cover to hold the film
in place by closing the back cover. Look
through the sprocket window to see if the film
is correctly engaged on the sprocket .
26
6
Press down on the back cover to prevent
it from rising, and turn the back cover lock
clockwise.
• If the film is sagging, the cartridge will rise
and
the back cover will not close.
7
Leave the lens cap on and make three blank
shots, each
time turning the film advance
lever.
The frame counter will advance from
the" S" mark to .. 0". With one more ad-
vance, the camera will be ready for the first
shot.