Canon QL FT - Page 27

Setting the Film Speed
When loading the film, be sure to set the film
speed scale at the proper position . Refer to
page 16 for setting the film speed.
• When repacking a long·wound film for dark ·
room loading into an ordinary cartridge , be
sure
to trim the tip of the leader between
perforations.
Checking Correct Film Loading
The film is properly loaded and advanced if
the film rewind crank rotates when you wind
the film advance lever. If the rewind crank
does not rotate. take out the film , as explained
on the following page, and reload.
27