166Using the Windows 98/95 Printer Driver
Making the Most of the Windows 98/95 Printer Driver
■ Using the BJ Status Monitor
The BJ Status Monitor (which is found in the Maintenance tab) is a utility program that
allows you to check the status of the printer. If an error occurs for some reason, the
BJ Status Monitor displays the cause of the error and a solution.
In addition, the BJ Status Monitor detects the remaining ink of the BJ cartridge and displays
a warning message when the ink is low.
About the operating environment
The following are the minimum requirements to run the BJ Status Monitor.
When using the parallel interface only:
• Check that your computer supports bi-directional communications.
• Check that your printer cable (interface cable) supports bi-directional
communications.
When using the parallel or USB interface:
• Check that the settings to support bi-directional communications are enabled in
the Windows operating system.
S400.book Page 166 Wednesday, August 16, 2000 12:02 AM
To Next Page
Loading...
