Canon SELPHY ES40 - Install and Start the Software; Software Installation Steps

58
Install and Start the Software
Windows Vista and Mac OS X 10.5 are used for these explanations.
Items to Prepare
A Computer
Supplied CD-ROM (COMPACT PHOTO PRINTER Solution Disk) (p. 3)
USB Cable shorter than 2.5m (8.2 ft) (Commercially available). SELPHY terminal requires a Type B
connector.
1
Install the software.
Windows
Place the CD-ROM in the computer’s CD-ROM
drive and click [Easy Installation] when the
screen on the left appears.
Follow the onscreen instructions to proceed.
If the User Account Control window appears,
follow the on-screen instructions to proceed.



Proceed with the installation to display the
screen on the left.

Macintosh
Place the CD-ROM in the computer’s CD-ROM
drive and double-click [ ].
When the screen on the left appears, click
[Install] and follow the onscreen instructions to
proceed.
When the install nishes, click [Finish] to
complete the installation.



2
Prepare SELPHY.
Turn off SELPHY and remove the memory card.
Insert a cartridge into SELPHY (p. 7).





COPY