Canon SELPHY ES40 - Adding Contents Data to SELPHY; Transferring Content from Memory Card

64
1
Insert the memory card containing the
contents data into the appropriate slot.
2
Display the [Printer Setup] screen.
Press the m(MENU) button.
Press the ud buttons or turn the w wheel
to choose [Printer Setup], then press the o
button.


3
Choose [Transfer Content].
Press the ud buttons or turn the w wheel to
choose [Transfer Content], then press the o
button.

4
Add (update) contents.
Press the o button to begin adding the
contents data to SELPHY. When nished, the
menu screen will display.
Until the contents data has nished updating, do
not remove the memory card, turn off SELPHY’s
power, or press any of SELPHY’S buttons. This
may cause the printer to malfunction.


5
Print using the added (update) contents.
You can print the added frames using the
procedure described in “Printing with Frames”
(p. 40) and, the clip art using the procedure
described in “Printing with Clip Art” (p. 42).

In the procedure in Step 4, all 5 contents are updated.
Adding Contents Data to SELPHY
COPY