Reset setting
You can set the settings back to the default.
• Web service setup only
Deletes IJ Cloud Printing Center and Google Cloud Print registrations.
• LAN settings only
Sets the LAN settings other than the administrator password back to the default.
After resetting, perform setup again as necessary.
• Telephone number only
Deletes all registered telephone/fax numbers.
• Settings only
Returns the settings such as the paper size, media type, or other setting items back to the default. The
LAN settings and the telephone/fax number are not returned back to the default.
• Device info sending settings only
Applies the setting not to send the device information to Canon.
• FAX settings only
Returns all fax settings back to the default. Disconnect the telephone line from the printer before you
return this setting item back to the default.
After resetting, perform setup again as necessary.
• Reset all
Sets all settings you made to the printer back to the default. The administrator password specified for
the printer is set to the default setting.
After resetting, perform setup again as necessary.
Note
• You cannot set the following setting items back to the default:
• The language displayed on the touch screen
• The current position of the print head
• The country or region selected for Country or region
• CSR (Certificate Signing Request) for encryption method (SSL/TLS) setting
You can delete the registered user's name or telephone number following the procedure below.
1. Display User information settings screen.
Setting Sender Information
2. Select user's name or telephone number and delete all characters or numbers.
3. Select OK when you finished deleting all characters or numbers.
202
To Next Page
Loading...
Need help?
General
