Inserting the Memory Card
Important
• When a memory card is inserted into the card slot, the Access lamp is lit. When the Access lamp is
flashing, the printer is accessing the memory card. In this case, do not touch the area around the card
slot.
Note
• When you use a computer to edit or enhance photos saved on a memory card, be sure to print them
from the computer. If you use the operation panel, the photos may not be printed properly.
1.
Prepare your memory card.
Attach a special card adapter if your memory card requires one.
Before Inserting the Memory Card
2.
Insert the memory card into the card slot.
Insert your memory card straightforward WITH THE LABELED SIDE FACING UP into the card slot.
When the memory card is inserted properly, the Access lamp (A) will light up.
* Be sure to attach the card adapter to the following types of memory card before inserting to the card
slot.
•
miniSD Card, miniSDHC Card
•
microSD Card, microSDHC Card, microSDXC Card
Important
• Part of the memory card will protrude from the card slot, but do not force it into the slot any further. This
can damage the printer or the memory card.
• Make sure that the memory card is correctly oriented before inserting it into the card slot. If you force
the memory card into the card slot in the wrong orientation, the memory card or the printer can be
damaged.
95
To Next Page
Loading...
Need help?
General
