Canon TR8500 Series User Manual

Scanning in Basic Mode
Use the Basic Mode tab to scan easily by following these simple on-screen steps.
To scan multiple documents at one time from the Platen, see Scanning Multiple Documents at One Time
with ScanGear (Scanner Driver).
When scanning from the ADF (Auto Document Feeder), preview is not available.
Important
• The following types of documents may not be scanned correctly. In that case, click (Thumbnail)
on the Toolbar to switch to whole image view and scan.
• Photos with a whitish background
• Documents printed on white paper, hand-written text, business cards, and other unclear documents
• Thin documents
• Thick documents
• The following types of documents cannot be scanned correctly.
• Documents smaller than 1.2 inches (3 cm) square
• Photos that have been cut to irregular shapes
Note
• Both sides of a two sided document can be scanned simultaneously on models with ADF duplex
scanning support.
1.
Place document on machine's Platen or ADF, and then start ScanGear (scanner driver).
Positioning Originals (Scanning from Computer)
Starting ScanGear (Scanner Driver)
2.
Set Select Source to match your document.
338

Canon TR8500 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 1200 dpi
Max Scan Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	15.0 ipm
Print Speed (Color)	10 ppm
Scanner Type	Flatbed
Connectivity	USB, Wi-Fi, Ethernet
Paper Handling	100-sheet input tray
Display	4.3-inch LCD touchscreen
Paper Sizes	Letter, Legal
Mobile Printing	AirPrint
Ink Type	Pigment Black, Dye-based Color