From Paper Source, check the setting or select a new paper source.
The current printer settings appear in Media Type and Page Size.
4.
Apply settings
To apply the printer settings to the printer driver, click Set.
Note
• If the Type on the printer is set to Ink Jet Hagaki, Hagaki K, or Hagaki, or if the Page size on the
printer is set to 2L/5"x7"(13x18), click Set to display the dialog box.
Select the media type and paper size that match your purpose, and then click OK.
•
If the Type and the Page size on the printer are not set or are set to Others, Set will be grayed
out and cannot be clicked.
•
If communication with the printer is disabled, the Printer Media Information... dialog box will
not appear or the printer driver will not be able to obtain printer media information.
261
To Next Page