Canon VB-H761LVE User Manual

BIE-7251-000
Before Reading
the Operation Guide
This notice describes new functions and specification
change with the latest firmware, and the latest
information such as changes to the "Operation Guide"
on P. ii to P. xvii.
"Before Reading the Operation Guide"
Checking and Updating the Firmware Version..................................................................P. ii
New Functions and Specification Changes..........................................................................P. iii
Information on Other Changes ....................................................................................................P. xiii
"Operation Guide".........................................................................................................................................P. 1
Notice on New Functions and Changes
Updating to the latest firmware enables new functions and
specification changes. For information on checking the firmware
version and updating the firmware, see the next page.
Operation Guide
For those already using this product
For the latest information of the firmware update,
please read P. ii to P. xvii.
For those using this product for the first time
Please read P. ii to P. xvii in conjunction with P. 1 and
onwards of the "Operation Guide".

Canon VB-H761LVE Specifications

General

Image Sensor	1/2.8-inch CMOS
IR LED	Yes
Wide Dynamic Range	Yes
Video Compression	H.264, MJPEG
Max Resolution	1920 x 1080
Frame Rate	30 fps
Ethernet	10Base-T / 100Base-TX
Weather Resistance	IP66
Vandal Resistance	IK10
Effective Pixels	2.1 Megapixels
Aperture	F1.6
Minimum Illumination (Color)	0.5 lux
Shutter Speed	1/3 - 1/10000 sec
Day/Night	Yes
Audio Compression	G.711, G.726
Audio Input/Output	1 input, 1 output
Power Source	PoE (IEEE 802.3af)
Operating Temperature	-10°C to 50°C
Operating Humidity	20% to 80% (non-condensing)
Lens Type	Varifocal

Summary

Operation Guide Introduction

Checking and Updating Firmware

Procedures for verifying and updating camera firmware versions.

Overview of New Functions

Summary of new features and specification changes in the latest firmware.

Initial Setup and Key Changes Summary

Chapter 2 Camera Setup

Installing Necessary Software

Guide to installing software like Camera Management Tool and Recorded Video Utility.

Security Settings Configuration

Steps to configure firewall and add camera IP to trusted sites for security.

Initial Camera Settings

Setting up administrator account, network, and camera name for initial use.

Chapter 3 Setting the Camera Angle

Chapter 5 Setting Page Configuration

Navigating the Setting Page

Network and Security Configuration

Video and Audio Settings

Chapter 6 Appendix and Troubleshooting

Troubleshooting Common Problems

Solutions for issues like camera not launching or connecting.

Restoring Factory Defaults