3
Software for aiding production workflow
Canon XF Utility (A 119) lets you copy the clips you
recorded from an SD card to a computer, play back
the clips and organize them. You can also use the
Canon XF plugins to work with the clips directly from
Avid non-linear editing (NLE) software.
Additionally, MP4 Join Tool (A 119) is a small
application that lets you join MP4 clips that were
split into multiple files.
Creativity and Artistic Expression
Special recording modes
When you make recordings, you can change the
recording frame rate to achieve a fast or slow motion
effect (A 44). Alternatively, you can use pre-
recording to record 3 seconds before you press the
button, helping you capture those hard-to-catch
opportunities (A 84).
Looks (
A 70)
You can adjust various aspects of the picture, such
as the color depth, sharpness and brightness, to
create a desired "look". If you prefer, you can use
one of the preset looks offered. The [ Neutral]
look for example produces a more natural perceived
resolution, while the [ Wide DR] look applies a
gamma curve with a very wide dynamic range and
an appropriate color matrix.
Custom picture settings (A 94)
Select one of the preset color settings or set the
combination of gamma curve, color space and color
matrix that you wish to use. Then, you can adjust a
number of other image-related parameters in detail.
With the Canon Log 3 gamma curve which features
an expanded dynamic range, you can be sure that
the camcorder covers your creative needs.
Other Features
• Battery packs compatible with Intelligent System
for better remaining usage time information.
• Compatibility with the optional GP-E2 GPS
Receiver to geotag your recordings (A 88).
• Compatibility with the optional RC-V100 Remote
Controller when you need a professional level of
remote operation (A 86).
• Menu settings file that can be saved in the
camcorder or on an SD card to restore all the
menu settings or replicate them on another XA70
/ XA75 camcorder (A 102).
• UVC support, allowing for the camcorder to be
used as a web camera by connecting it to a
computer using a USB cable (A 87).
To Next Page
Loading...
