Canon XA75 - Page 75

75
Recording Audio
Audio Settings and Recorded Audio Channels
Which audio inputs are recorded to which audio channels is determined by a combination of menu settings,
whether the handle unit is attached, and other audio-related controls on the camcorder. The following table gives
an overview of the possible combinations. Refer also to the illustration following the table.
* For MP4 clips, only when > [3 Recording Setup] > [¸ Audio Format] is set to [ LPCM 16bit 4CH].
Microphone
connected
to the MIC
terminal
AUDIO IN switch
Menu settings
Recorded audio channels/audio sources
[C ! Audio Setup] >
for
INPUT 1
for
INPUT 2
[CH2 Input] [CH3/CH4 Input]* CH1 CH2 CH3* CH4*
–
INPUT1 INPUT2
[
INPUT 2]
[ INPUT
Terminal]
INPUT 1
terminal
INPUT 2 terminal
INPUT 1
terminal
INPUT 2
terminal
INPUT1 INPUT2
[
INPUT 1]
[ INPUT
Terminal]
INPUT 1 terminal
Yes
INPUT1 INPUT2
[
INPUT 2]
[ Built-in Mic/
MIC Terminal]
INPUT 2 terminal
MIC
terminal (L)
MIC
terminal (R)
INPUT1 INPUT2
[
INPUT 1]
[ Built-in Mic/
MIC Terminal]
INPUT 1 terminal
INPUT1
INT.MIC/
MIC
– –
MIC terminal
(mono)
INT.MIC/
MIC
INPUT2 – –
MIC terminal
(mono)
INPUT 2 terminal
No
INPUT1 INPUT2
[
INPUT 2]
[ Built-in Mic/
MIC Terminal]
INPUT 1
terminal
Built-in
microphone
(L)
Built-in
microphone
(R)
INPUT1 INPUT2
[
INPUT 1]
[ Built-in Mic/
MIC Terminal]
INPUT 1 terminal
INPUT1
INT.MIC/
MIC
– –
Built-in
microphone
(mono)
INT.MIC/
MIC
INPUT2 – –
Built-in
microphone
(mono)
INPUT 2 terminal
Yes
INT.MIC/
MIC
INT.MIC/
MIC
– – MIC terminal (L) MIC terminal (R)
No
INT.MIC/
MIC
INT.MIC/
MIC
– –
Built-in
microphone (L)
Built-in
microphone (R)
Yes
Handle unit not attached
– – MIC terminal (L) MIC terminal (R)
No – –
Built-in
microphone (L)
Built-in
microphone (R)
AUDIO IN switches (audio input selection)
for INPUT 1 for INPUT 2
Audio controls cover