EasyManuals Logo

Canton Smart Amp 5.1 Short Manual

Canton Smart Amp 5.1
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
3
31
English
Batteries must be inserted correctly according to the polarity imprint. Incorrect insertion can lead
to damage. Only use the batteries or rechargeable batteries specified for the device. The batteries
supplied are not rechargeable batteries, i.e. these batteries must not be recharged. The device
contains permanent magnets.
The device and/or the accessory may contain small parts that can be swallowed. Therefore not
suitable for children under three years.
This symbol indicates uninsulated dangerous voltages inside the case that are sufficiently strong
(amplitude) to cause a fire or electric shock.
This symbol warns you of important operating and maintenance instructions in the accompanying
documentation (manual) supplied.
This symbol indicates Class II devices, where protection against electric shock is provided by
double or reinforced insulation during specified use and therefore no protective earth connection is
required.
The minimum load impedance of the loudspeaker must not fall below 3 (Ohm).

Other manuals for Canton Smart Amp 5.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canton Smart Amp 5.1 and is the answer not in the manual?

Canton Smart Amp 5.1 Specifications

General IconGeneral
Video in3x HDMI
Video out1x HDMI
Ethernet LAN (RJ-45) ports1
Speakers connectivity type-
Product colorBlack
Volume controlTouch
Cables includedAC
Treble adjustmentYes
Connectivity technologyWired & Wireless
Audio decodersDTS-HD, Dolby Atmos
Audio output channels- channels
Peak power per channel600 W
Signal-to-Noise Ratio (SNR)- dB
Total Harmonic Distortion (THD)- %
Weight and Dimensions IconWeight and Dimensions
Depth154 mm
Width245 mm
Height120 mm
Weight5240 g

Related product manuals