Canton Smart Amp 5.1 - Wireless Setup (WIS); RF Channel (CHN) Selection; Wireless Reset (WRE) Function

3
45
English
CONNECTION VIA BLUETOOTH
®
WIRELESS TECHNOLOGY
You can conveniently connect the Smart Amp 5.1 to your (mobile) device via
Bluetooth
®
wireless technology. For this, please proceed as follows:
Establish connection via Bluetooth
®
wireless technology
1
Select the Bluetooth
®
input [BT] by repeatedly pressing the arrow keys ( / )
on the Smart-remote.
2
Now, press the button „Bluetooth Pairing“ on the Smart-remote. The dis-
play indictes [BTP].
3
Start the search on your (mobile) device.
4
Select Smart Amp 5.1xxx as the playback device.
Note:
• If you have assigned a name to the Smart Amp 5.1 during network setup
(e.g. living room), this name is also displayed here.
5
After confirmation, the connection is established automatically and the
message [BT-] and [CON] appears on the display of the Smart Amp 5.1.
6
Start playback of a track on your (mobile) device and the sound is automati-
cally played back by the Amp 5.1 via the connected speakers.
7
If the connection has failed, you receive the message [FAI].
8
If the (mobile) device requires a code, enter 0000.
9
If [BT-] and [DIS] appears on the display, your (mobile) device is out of ran-
ge or logged out.