48
English
ASSIGNING PRESET 1–3
The Smart Amp 5.1 is able to assign three memory buttons with „presets“.
Settings like volume, selected input and settings in the Speaker Setup [SPS]
menu (sound settings, etc.) as well as playlists from the app „Spotify“ can be
stored. The memory buttons can be operated via the Smart remote control as
well as via the keypad on top of the Smart Amp 5.1.
Practical tip:
• We recommend you to store the settings you have made in the loud-
speaker menu during the initial set-up of the Smart Amp 5.1, e.g. regarding
loudspeaker levels and distances, sound settings, etc., to one of the three
preset buttons so that your settings are not overwritten by the (neutral)
factory settings if you accidentally press one of the preset buttons.
To store playlists and/or (sound)settings, please proceed as follows:
1
Please apply the desired settings regarding volume, sound, input, etc. and
press and hold the memory button 1, 2 or 3 until the corresponding
number [P1], [P2] or [P3] is shown in the display and no longer flashes.
2
To store a playlist, please open the desired playlist on the app „Spotify“ on
your (mobile) device and start playback. Be sure to select Spotify Connect
as your connection to Smart Amp 5.1, not Chromecast built-in. Now, please
press and hold the corresponding memory button 1, 2 or 3 until the cor-
responding number [P1], [P2] or [P3] is shown in the display and no longer
flashes. Storing a playlist automatically stores all (sound)settings, too.
3
To recall the settings resp. a playlist from these presets, please press the
corresponding button 1, 2 or 3 briefly. The settings are then called up,
resp. the tracks from the stored playlist are played back automatically by
the Smart Amp 5.1 (even without using your (mobile) device).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
