Canton Smart Amp 5.1 Short Manual

3
47
English
Playback via AirPlay resp. AirPlay 2 Technology
Requirements to play music using AirPlay 2 technology:
• iPhone, iPad, iPod touch or HomePod with iOS 11.4 or higher.
• Apple TV 4k or Apple TV HD with tvOS 11.4 or higher
• Mac or PC with iTunes 12.8 or higher resp. Mac with macOS Catalina or
higher.
Playback on Smart Amp 5.1 (and other devices):
1
To play your music using the Amp 5.1, start the playback of the desired title
in a media app on your [mobile] device.
2
Open the Control Center on your Apple device. Swipe from the top right
corner (iOS 12 or higher) or from the bottom (iOS 11 or lower) towards the
center of the display.
3
Select the AirPlay symbol in the Audio Card, and in the dialog that opens
select the amplifier(s) resp. speaker(s) which you want to use for playback.
To start music playback on one or more AirPlay-enabled device(s) via Mac,
Apple TV or Apple Music, please refer to the following support page:
https://support.apple.com/en-ca/HT202809
Notes:
• Use Siri on your iPhone, iPad, HomePod, or Apple TV to control the Amp 5.1
with just your voice.
• The Smart Amp 5.1 supports only audio streaming, no video streaming.

Canton Smart Amp 5.1 Specifications

General

Video in	3x HDMI
Video out	1x HDMI
Ethernet LAN (RJ-45) ports	1
Speakers connectivity type	-
Product color	Black
Volume control	Touch
Cables included	AC
Treble adjustment	Yes
Connectivity technology	Wired & Wireless
Audio decoders	DTS-HD, Dolby Atmos
Audio output channels	- channels
Peak power per channel	600 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	- %

Weight and Dimensions

Depth	154 mm
Width	245 mm
Height	120 mm
Weight	5240 g