Canton Smart Amp 5.1 - 3 D Audio (3 D) Intensity; Display Setup (UI) Options

38
English
Play Mode PURE DIRECT Source correct reproduction without the
use of a virtualizer or upmixer
Bluetooth
®
BTP Bluetooth
®
pairing mode
Bluetooth
®
BT- / CON Connection established
Bluetooth
®
BT- / DIS Connection disconnected or interrupted
Bluetooth
®
FAI Failure occurred during pairing process
Incoming signal DOLBY ATMOS Dolby Atmos
®
bitstream
Incoming signal DOLBY DIGITAL Dolby
®
Digital multichannel bitstream
Incoming signal DOLBY DIGITAL 2.0 Dolby
®
Digital two-channel bitstream
Incoming signal DTS HD DTS-HD
®
bitstream
Incoming signal DTS DTS
®
Digital Suround
TM
bitstream
Incoming signal PCM Digital stereo signal
Networking CAST Usage of Chromecast built-in
Networking SPOTIFY Usage of Spotify Connect
Networking AIRPLAY Usage of AirPlay technology
Network Setup NET / SET Ready for network connection
Network Setup WIF / CON Wireless network (WLAN) connected
Network Setup WIF / DIS Wireless network (WLAN) disconnected
Network Setup ETH / CON Network (Ethernet) connected
Network Setup ETH / DIS Network (Ethernet) disconnected
Note:
• Further displays can be found in the detailed operating instructions.
These can be found at: www.canton.de/manual/amp5.1