Canton Smart Amp 5.1 User Manual

3
79
English
Unpacking
Unpack the box carefully and check that all the following parts
are present:
Delivery content
• 1x Smart Amp 5.1
• 1x Remote control
• 1x Power cord
• 1x Short manual
Setting up the
remote control
The remote control comes with a
battery already installed. Simply
remove the protective film to
activate. When replacing the
battery ensure that it is correctly
inserted according to the polarity
markings (+/–).
Only use the battery specified for
this system (CR 2032).
CR 2032
OPEN CLOSE
Place the Smart Amp 5.1 in the desired location and
connect it to the power input using the power cord. Make
sure that your TV is plugged in. If you want to connect
your Amp to the WiFi network, please make sure your WiFi
router is active and has a connection to the Internet.
Connection

Canton Smart Amp 5.1 Specifications

General

Video in	3x HDMI
Video out	1x HDMI
Ethernet LAN (RJ-45) ports	1
Speakers connectivity type	-
Product color	Black
Volume control	Touch
Cables included	AC
Treble adjustment	Yes
Connectivity technology	Wired & Wireless
Audio decoders	DTS-HD, Dolby Atmos
Audio output channels	- channels
Peak power per channel	600 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	- %

Weight and Dimensions

Depth	154 mm
Width	245 mm
Height	120 mm
Weight	5240 g