Canton Smart Connect 5.1 User Manual

3
111
English
Playmode [PLM]
In this menu you can activate additional playmodes that can then be used and selected in addition to the 3 standard playmodes Stereo, Movie
and Music with the PM button on the optionally available Smart remote. These playmodes are:
• Discrete: Surround sound for movies, music, etc. without a virtualizer.
• Night: (Virtual) surround sound with reduced dynamic and higher voice clearity at low volume levels for "night usage".
• Party: Plays the front channels (L+R) additionally on the surround speakers.
• Pure Direct: Surround sound for movies, music, etc. without a virtualizer or upmixer.
To activate or deactivate an additional playmode please do as follows:
1
To enter the menu, press and hold the input select key " " for at least 3 seconds.
2
Use the "+" resp. the "–" key to select the menu item System Setup [SYS] and confirm with the "Play/Pause" button " ".
3
Use the "+" resp. the "–" key to select the menu item Playmode [PLM] and confirm with the "Play/Pause" button " ".
4
Use the "+" resp. the "–" key to select the desired playmode and press the "Play/Pause" button " ".
5
Use the "+" key to activate resp. the "–" key to deactivate the desired playmode and confirm by pressing the "Play/Pause" button " ".
6
To activate or deactivate a different playmode please repeat the steps 4 and 5.
7
Exit the menu item by pressing the Input-button " ".
3D Audio [3D]
With this option you can adjust the intensity of the virtualizer and the virtual Dolby Atmos
®
effect to your personal taste.
Starting from default setting Normal [NOR] you can increase the effect High [HIG] or decrease the effect Low [LOW].
To adjust the setting, please to as follows:
1
To enter the menu, press and hold the input select key " " for at least 3 seconds.
2
Use the "+" resp. the "–" key to select the menu item System Setup [SYS] and confirm with the "Play/Pause" button " ".
3
Use the "+" resp. the "–" key to select the menu item 3D Audio [3D] and confirm with the "Play/Pause" button " ".
4
Select the desired intensity using the "+" resp. the "–" key.
5
Confirm and exit the menu item by pressing the Input-button " ".

Canton Smart Connect 5.1 Specifications

General

Control type	Touch
Product color	Black
Audio decoders	DTS, Dolby Digital
Built-in display	Yes
Bluetooth version	4.0
Display technology	LED
Cables included	AC
Power consumption (economy mode)	0.46 W
HDMI input ports quantity	3
HDMI output ports quantity	1

Weight and Dimensions

Depth	140 mm
Width	245 mm
Height	52 mm
Weight	1230 g