Why does my Canton BRA 3 / VRA 3 Touch terminals keep switching to Bluetooth automatically?
If your Canton BRA 3 / VRA 3 Touch terminals are unintentionally switching to the BT input, this can happen when your mobile device issues system sounds, such as typing on the keyboard. Deactivate the function BT Select [BTS] (setting on MAN) or disable these system sounds on your device.
How to make my Canton BRA 3 / VRA 3 Touch terminals turn off automatically?
If your Canton BRA 3 / VRA 3 Touch terminals aren't turning off automatically, the standby function MAN might be activated. Activate the standby function ECO, AUT, LAN or NSB. If the standby function AUT or NSB is activated and the source device also transmits a carrier signal in standby mode (optical or coaxial digital input, only), disconnect the source device from the mains or manually switch off the BRA 3 / VRA 3.
Why do my Canton BRA 3 / VRA 3 Touch terminals keep turning off by themselves?
If your Canton BRA 3 / VRA 3 Touch terminals are switching off automatically, it could be due to the standby function (ECO, AUT, LAN or NSB) being activated. Select the standby function MAN. Alternatively, the infrared command for Standby may have been learned incorrectly; relearn the infrared command for Standby.
Why doesn't my Canton BRA 3 / VRA 3 Touch terminals turn on automatically?
If your Canton BRA 3 / VRA 3 Touch terminals aren't turning on automatically, the standby function might be set to NSB, requiring manual power on. Switch the standby function to AUT. If the device was switched off via the 'ON / Standby' button of the remote control or the 'Power' button of the TV remote control (when using the IR learning function), switch on the BRA 3 / VRA 3 via the 'ON / Standby' button of the remote control and wait until it automatically switches to the standby mode next time. You can also delete the 'Power' button of your TV remote from the BRA 3 / VRA 3 to prevent it from switching off together with your TV. Also, ensure that the signal at AUX (Line) input is not too low; increase the output level on your source device.
What to do if my Canton BRA 3 / VRA 3 Touch terminals won't turn on?
If your Canton BRA 3 / VRA 3 Touch terminals are not turning on, ensure the mains cable is properly connected to both the power outlet and the BRA 3 / VRA 3. Establish the connection if it is not.
Why is the sound so low on my Canton Touch terminals?
If the sound reproduction on your Canton BRA 3 / VRA 3 Touch terminals is too soft, first, increase the volume using the 'Volume' button and also increase the volume of the source device. If the maximum possible volume was limited by the 'Volume' function (VOL), increase the maximum possible volume according to instructions.
How to fix no Bluetooth playback on Canton Spectral VRA 3 Touch terminals?
If you're experiencing no playback via Bluetooth® on your Canton BRA 3 / VRA 3 Touch terminals, ensure there is a connection between the device and the terminals. If paired but not playing, reconnect the device. Also, maximize the volume on the mobile device and increase the volume on the BRA 3 / VRA 3. Ensure that sources of interference, such as a WiFi router or a laptop, are not placed in close proximity to the BRA 3 / VRA 3. If you have simultaneous operation via WiFi and Bluetooth® connection from a mobile device, disable Wifi on the device. Finally, reduce the distance between the speaker and the mobile device, ensuring you are within the maximum range of 10 m.
What to do if my Canton BRA 3 / VRA 3 Touch terminals remote control is not working?
If your Canton BRA 3 / VRA 3 Touch terminals aren't responding to the remote control, start by removing the protective film on the remote. If that doesn't work, replace the battery, ensuring correct polarity when inserting it.
General| Display | 15.6 inch PCAP Touchscreen |
|---|---|
| Processor | Intel Celeron J1900 |
| Internal Storage | 64GB SSD |
| Operating System | Windows 10 IoT Enterprise |
| Connectivity | Gigabit Ethernet, Wi-Fi 802.11 a/b/g/n, Bluetooth 4.0, 4 x USB 2.0, 2 x USB 3.0, 1 x Serial Port, 1 x Cash Drawer Port, 1 x HDMI |
| Dimensions | 390 x 250 x 360 mm |
| Weight | 5.8 kg |
To Next Page
