Canvas 088-1682-2 User Manual

ASSEMBLY
Step 15
To convert the swing into a hanging bed, push down the spring ring-pull on rear
seat support bar 10 first.Then release the back support tube from the rear seat
support bar 10 and fasten it to the U-shaped bracket on the rear leg crossbar 6.
When used as a bed, the seat assembly should be secured by these holders and
not allowed to swing.
13
Step 16
Attach the net 21 to the large canopy 19 by
hook-and-loop strip.
The net zipper goes in the centre of the
top crossbar.
Your swing is ready for use!
Requires
19, 21.
Requires
6, 10, 11
10
10
10
11
11
10
6
11
21

Canvas 088-1682-2 Specifications

General

Brand	Canvas
Model	088-1682-2
Category	Indoor Furnishing
Language	English