CAP 413 Radiotelephony Manual
Chapter 11 Page 5
NOTES:
1 TAKE-OFF – these words are only used when an aircraft is cleared for TAKE-OFF.
2 TAKE-OFF clearance requires readback.
3 Use of CLEAR is restricted to:
i) ATC clearances.
ii) Departure and Approach instructions.
iii) Take-off and landing clearances.
NOTE: Full readback of frequency change.
Figure 7 IFR – Take-off Clearance
BIGJET 347, cleared for take-off
surface wind calm
Cleared for take-off, BIGJET 347
Figure 8 IFR – Airborne Report
BIGJET 347, contact Wrayton control
129.1
Wrayton Control 129.1, BIGJET 347
31 March 2011
To Next Page
Loading...