Caple C2237 - Page 20

Instruction manual C2237
20
Please keep this instruction manual for future reference
HOW TO USE THE CLOCK FUNCTION
› When a function has been selected, the corresponding function indicator flashes for approx.
5 seconds. During this time the desired times can be set using + or - button.
› When the desired time has been set, the function indicator flashes for approx. another 5
seconds. After that the function indicator is then lit. The set time begins to run.
› Press any of the buttons to stop the acoustic signal.
› The desired oven function and temperature can be selected before or after the clock
functions of cook time
and end time are set.
› When the cooking time has ended, turn the oven function and temperature dial back to the
OFF position.
COUNTDOWN
› Press
button repeatedly, until the countdown indicator flashes.
› Using the + or - button, set the required countdown (max. 2 hours 30 minutes).
› After approx. 5 seconds, the display shows the remaining time.
› The countdown indicator
will light up.
› When the time has elapsed, the function indicator flashes and an acoustic signal sounds for
2 minutes. Press any button to switch off the signal.
COOK TIME
› Press selection button
repeatedly, until the cook time indicator flashes.
› Using the + or - button, set the required cooking time.
› After approx. 5 seconds, the display returns to the current time. The cook time indicator
will light up.
› When the time has elapsed, the cook time indicator will flash, an acoustic signal will sound
for 2 minutes and the oven will switch itself off. Press any button to switch the signal and
the programme off.