79Instruction manual C2600Please keep this instruction manual for future reference
ERROR CODES
ERROR CODE ERROR REASON
ER01 Thermostat not detected.
No thermostat detected or high
temperature detected. The oven will stop
heating and turn the cooling fan on.
ER02 Thermostat short circuit.
Very low temperature. The oven will stop
heating and turn on the cooling fan.
ER03
Temperature detected by the Meat
Probe is 105°C.
The temperature detected is higher than
normal; the Meat Probe may be in the
oven without being inserted into food.
Error code will reset when the Meat
Probe is removed.
ER04 Door lock not engaging.
When using the Pyrolytic function, the
door lock has failed to activate when
the cavity has reached the required
temperature. If this is detected for 3
minutes the heating elements will switch
off. Contact Caple Service.
If the problem still persists, please contact Caple service for assistance:
Phone: 0117 938 7420
Email: service@caple.co.uk
To Next Page
Loading...
Need help?
General
