Instruction manual C3371
11
Please keep this instruction manual for future reference
OVEN INSTALLATION
PLEASE CHECK THE FOLLOWING BEFORE INSTALLATION:
- The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining
furniture is made of veneered wood, the adhesives should be able to withstand a temperature
of 120˚C. Plastic materials or adhesive which cannot withstand this temperature will become
deformed or unstuck.
- To comply with safety regulations, once the appliance has been fitted it should not be possible to
make contact with the electrical parts.
- All parts which offer protection should be fixed in such a way that they cannot be removed
without the use of a tool.
- Ensure that the appliance is switched off before replacing the light to avoid the possibility of
electric shock.
IMPORTANT:
- Ensure the oven is disconnected from the mains prior to installation.
- Installation should be carried out according to the instructions by a professionally qualified
person. Caple cannot accept responsibility for any damage to persons, animals or other items
due to incorrect installation.
- Secure the appliance into its surround by inserting screws into the 4 holes that can be seen in
the frame of the oven when the door is open (Fig.1).
A
A
A
To Next Page
Loading...
