Caple C3371 - Page 22

Instruction manual C3371
22
Please keep this instruction manual for future reference
HOW TO USE THE CLOCK FUNCTION
- When a function has been selected, the corresponding function indicator flashes for approx. 5
seconds. During this time the desired times can be set using
or button.
- When the desired time has been set, the function indicator flashes for approx. another 5 seconds.
After that the function indicator is then lit. The set time begins to run.
- Press any of the buttons to stop the acoustic signal.
- The desired oven function and temperature can be selected before or after the clock functions of
cook time
and end time are set.
- When the cooking time has ended, turn the oven function and temperature dial back to the
OFF position.
COUNTDOWN
- Press button repeatedly, until the countdown indicator flashes.
- Using the
or button, set the required countdown (max. 2 hours 30 minutes).
- After approx. 5 seconds, the display shows the remaining time.
- The countdown indicator
will light up.
- When the time has elapsed, the function indicator flashes and an acoustic signal sounds for 2
minutes. Press any button to switch off the signal.
COOK TIME
- Press selection button repeatedly, until the cook time indicator flashes.
- Using the
or button, set the required cooking time.
- After approx. 5 seconds, the display returns to the current time. The cook time indicator
will
light up.
- When the time has elapsed, the cook time indicator will flash, an acoustic signal will sound
for 2 minutes and the oven will switch itself off. Press any button to switch the signal and the
programme off.