22
Instruction manual C7011G/C7091G/C7071G/C7061G
Please keep this instruction manual for future reference
REPLACEMENT OF BURNER INJECTOR
› Loosen the injector with a dedicated socket (7mm). Fit the new injector, suitable for the
required gas type (see table ‘Burners and Injectors Specifications’).
› After you have converted the hob to another gas type, make sure you have placed a label
containing that information on the appliance.
› Adjust the reduced flow, see ‘Valve Adjustment’.
NOTE:
Always tightly lock the injector in place, without adding any material on the injector’s threads.
To Next Page
Loading...
