Instruction manual CGC611 CGC711 CGC911 17
Please keep this instruction manual for future reference
REPLACING THE BULB
NOTE:
The lights must be replaced by a qualified person.
1. Switch the unit off and unplug the appliance.
2. Remove the 4 screws on the curved glass panel, and take off the glass carefully.
3. Unplug the light from the connector and then push the light out of the hood.
4. Replace with the same type and rated bulb/lamp fixing. LED lamp (max 2W).
5. Connect the replacement light and screw the glass panel back on securely.
LIGHT SOURCE ENERGY CLASS
This product contains a light source of energy efficiency class G.
To Next Page
Loading...
