Caple DD925CO - Dimensions

Instruction manual DD925CO
8
Please keep this instruction manual for future reference
DIMENSIONS
DESCRIPTION
OF THE APPLIANCE
EN
5
Note: The Downdraft worktop cutout can be connected to the hob cutout,
but only for electric hobs.
For gas hobs, a minimum 50mm gap must be left beetween the edge of
the gas hob and the downdraft frame
NOTE:
The Downdraft worktop cutout can be connected to the hob cutout, but only for electric hobs.
For gas hobs, a minimum 50mm gap must be left between the edge of the gas hob and the
downdraft frame.